Big Discount Homemade Bird Spikes - Construction Material Corner Guard Corner Bead for Plastering – JIKE

Angle line has metal Angle line, metal Angle net also known as stair Angle net | stair step net | mesh Angle net | diamond Angle net

It features:

1, the two sides of the metal Angle guard is made of high-quality galvanized material, anti-aging, corrosion resistance and fire resistance, effectively prevent rust.

2, the precise design of the acute Angle of the metal Angle guard bar, to avoid the impact of the edge of the concentrated force, the external force evenly distributed around the edge, effectively protect the intact Yang Angle.

3, the metal Angle guard is divided into two kinds of punching and expansion, not only convenient to nail and make the Angle guard and corner parts of gypsum board or other bonding materials more firmly.

4, the metal Angle protection bar corner construction does not need to rely on the wooden plank, the primary plastering worker can also make the perfect corner straight line, shorten the construction time, effectively reduce the construction cost.Made of high strength PVC raw material, corrosion resistance, impact resistance, aging resistance, good weather resistance, excellent mechanical and mechanical properties.

Material: galvanized steel plate, stainless steel plate, aluminum alloy plate.
Thickness: 0.3 0.8 mm
Side width: 18*18mm/25*25mm/30×30mm, 40*40/50×50mm, 60×60mm, 75x75mm.
Length: 1m-3m conventional, can also be made according to customer requirements.
Usage: Angle guard net is made of galvanized steel plate or stainless steel plate.The expanded wings of the hornguard can be firmly combined with the plaster to form a smooth, straight and simple corner, and at the same time to protect the corner from fragmentation, and the construction is easy and the cost is low, which can save a lot of time.

Material: galvanized,stainless steel,aluminum
Thickness:0.3-0.8mm
Side size: 18*18mm/25*25mm/30×30mm、40*40/50×50mm、60×60mm、75x75mm。
Length:standard 1m-3m , can be made as request
Usage:made of galvanized steel plate or stainless steel plate.The expanded wings of the hornguard can be firmly combined with the plaster to form a smooth, straight and simple corner, and at the same time to protect the corner from fragmentation, and the construction is easy and the cost is low, which can save a lot of time.

Expanded Corner Bead
Material：galvanized，stainless steel
Thicnkness: 0.3-0.8mm
Length: standard 1m-3m , can be made as request
Hole size: 5×15mm、10×20mm、10×30mm
Side size:30×30mm、50×50mm、60×60mm、75x75mm

Z type Angle protector

In some special projects, the treatment of shadow Angle between wall and wall and between wall and ground also has higher requirements.Be like hospital, food factory, pharmaceutical factory, shop, and toilet, the user does not want these shade Angle to become finally collect filth, bacterium to breed, do the blind corner of clean processing hard.As a result, trimming the edges with negative corners creates a small circular arc that is easier to clean and maintain.

Features:

1, Z Angle double side is made of high quality galvanized material, anti-aging, corrosion resistance and fire resistance, effectively prevent rust.
2, Z type Angle guard precise size design of acute Angle, avoid the impact of the edge of the concentrated force, the external force evenly distributed to the edge of the surrounding part, effectively protect the intact Yang Angle.
3, Z type Angle guard punching and expansion of two kinds, not only easy to nail and make the corner guard bar and corner parts of gypsum board or other bonding materials more firmly.
4, z-type corner protection construction does not need to rely on wooden slats, primary plastering workers can also make a perfect corner line, shorten the construction time, effectively reduce the construction cost.

Z type Angle protector:
1, Z type Angle guard first cut the metal Angle guard to the required length, and apply adhesive plaster in the positive Angle to bond the metal Angle guard, or directly fixed with screws in the positive Angle.
2. Type Z Angle guard stick the metal Angle guard strip along the positive Angle to the joint filler, and gently squeeze it to bond firmly.Cover 100mm wide caulking material on each side and leave to dry.
3. Gently polish the surface of the seam filling material on the second layer of z-type Angle protector with sandpaper after it is dry.

4. Apply the third layer of seam filler with a width of about 200mm on each side.
Material: galvanized steel plate, stainless steel plate, aluminum alloy plate.PVC. Plate thickness: 0.3-0.5mm length: 2.4m-3m conventional, can also be made according to customer requirements.

Caulking Strip is made of metal or plastic PVC material. It is mainly used for caulking cracks in wall cracks and cracks in gypsum board ceiling. It is a practical caulking strip with practical price and simple construction.Just fill the seam with lime putty, then plug in the filling thread, press it flat, then brush a layer, natural air dry after grinding sand.This kind of mending thread has good tensile and compressive properties and is necessary material for decoration project.

The t-shaped seam repair strip is different from the ground glue seam repair strip, which has a wider application scope. It is mainly used for plaster seam repair strip, flat Angle seam repair strip, mainly PVC plastic seam repair strip, and metal seam repair strip with higher requirements.

Plaster Stop Mesh, New building materials for building decoration ,stop plaster edge drawing net can form straight edges on the edges of plaster works to resist cracking or cracking, and protect and reinforce the most fragile parts of plaster. Its net wings can be firmly anchored into the full depth of plaster applied on either side of the edge.

Angle netting is very important for stucco because it is most likely to cause damage to the stucco corners during construction and after use, and is therefore strong and saves a lot of time because of its ease of construction.Other specifications can also be customized, welcome to inquire

Single side Angle protection net, plaster stop bar, single side plaster Angle protection net, also known as plaster stop bar, consists of mesh Angle protection net and stop mouth, into the shape of L, mainly used for site construction when plaster stop use, with batch swing net, template net to use, effectively improve the efficiency.

At present, it is not used in China, mainly in Europe, Australia, Singapore and other countries.

Plastering stop edge mesh, Angle mesh, stop edge mesh, stop plastering mesh, cement stop mesh

The discontinuation of the plasterwork will form straight edges on the edges of the stucco works to resist cracking or cracking and to protect and reinforce the most vulnerable parts of the stucco. The mesh wings may be firmly anchored to the full depth of the stucco applied on either side of the edge.

Application: stop plasterer is suitable for construction of everything from individual residential multi-storey structures to any cement plasterer works.Can guarantee the edge clean and tidy, mainly used for wall and window frame edge and ceiling decoration.

Material: hot dip galvanized steel plate, stainless steel plate.
Thickness: 0.4 to 0.5
Length: 1m-3m conventional, can also be made according to customer requirements.
Height: 13 mm, 16 mm, 19 mm
Packing: 50 pieces/carton