Flat-Flex® XT® conveyor belt is available in the following belt meshes:
- 7.26 X 1.60 mm
- 12.7 x 1.83 mm
- 9.60 x 1.83 mm
- 9.60 x 2.08 mm
Edge Loop Types Available:
C-Cure-Edge®
Single Loop Edge (SLE)
Flat-Flex® XT® Quick Reference Chart
|
XT Code Reference |
Pitch and Wire Diameter |
Nominal opening between wires |
Edge Loop Size |
XT Space Width |
Minimum Large Space Width |
Average Belt Weight (Kgs/m²) |
Maximum Tension per Joint - Kgf (N) |
Minimum Transfer Outside Diameter (grooved) |
Typical Open Area (%) |
|
X426 |
7.26 x 1.6 |
5.66 |
7 |
22.23 |
50.8 |
2.9 |
6.8 (66.7) |
19 |
71 |
|
X247 |
12.7 x 1.83 |
10.87 |
7 |
22.23 |
44.45 |
2.7 |
8.2 (80) |
25 |
78 |
|
X327 |
9.6 x 1.83 |
7.77 |
8 |
22.23 |
57.15 |
3.1 |
8.2 (80) |
25 |
74 |
|
X328 |
9.6 x 2.08 |
7.52 |
8 |
25.4 |
82.55 |
3.75 |
10 (98) |
25 |
72 |
| Width Tolerance(max. width 4267mm);0 to 150 belt width: +/-0.8 150 to 900 belt width: +/-1.9 900 to 1500 belt width: +/-2.4 over 1500 belt width: +/-3.2 |
|||||||||
All dimensions are in millimetres (mm)
Component and Support Requirements for Flat-Flex® XT® Belts
|
COMPONENT QUANTITY CHART (SPROCKETS / BLANKS / SUPPORT STRIPS) |
||||
|
Number of XT spaces across belt |
Drive shaft |
Idler shaft |
Belt supports |
|
|
Number of Sprockets |
Number of |
Wear Strips |
||
|
Sprockets |
Blanks |
|||
|
3 |
3 |
2 |
1 |
2 |
|
4 |
4 |
2 |
2 |
3 |
|
5 |
5 |
2 |
3 |
4 |
|
6 |
6 |
2 |
4 |
5 |
|
7 |
7 |
2 |
5 |
6 |
|
8 |
8 |
2 |
6 |
7 |
|
9 |
9 |
2 |
7 |
8 |
|
10 |
10 |
2 |
8 |
9 |
|
11 |
11 |
2 |
9 |
10 |
|
12 |
12 |
2 |
10 |
11 |
|
13 |
13 |
2 |
11 |
12 |
|
14 |
14 |
2 |
12 |
13 |
|
15 |
15 |
2 |
13 |
14 |
|
16 |
16 |
2 |
14 |
15 |
|
17 |
17 |
2 |
15 |
16 |
|
18 |
18 |
2 |
16 |
17 |
|
19 |
19 |
2 |
17 |
18 |
|
20 |
20 |
2 |
18 |
19 |
|
21 |
21 |
2 |
19 |
20 |
|
22 |
22 |
2 |
20 |
21 |
|
23 |
23 |
2 |
21 |
22 |
|
24 |
24 |
2 |
22 |
23 |
|
25 |
25 |
2 |
23 |
24 |
|
26 |
26 |
2 |
24 |
25 |
|
27 |
27 |
2 |
25 |
26 |
Additional sprockets may be required on idler shafts exceeding 1200mm
