High reputation Stainless Steel Mesh Conveyor Belt - Wire Mesh Conveyor Belt Flat-Flex Type – JIKE Detail:
Flat-Flex® XT® conveyor belt is available in the following belt meshes:
- 7.26 X 1.60 mm
- 12.7 x 1.83 mm
- 9.60 x 1.83 mm
- 9.60 x 2.08 mm
Edge Loop Types Available:
C-Cure-Edge®
Single Loop Edge (SLE)
Flat-Flex® XT® Quick Reference Chart
|
XT Code Reference |
Pitch and Wire Diameter |
Nominal opening between wires |
Edge Loop Size |
XT Space Width |
Minimum Large Space Width |
Average Belt Weight (Kgs/m²) |
Maximum Tension per Joint – Kgf (N) |
Minimum Transfer Outside Diameter (grooved) |
Typical Open Area (%) |
|
X426 |
7.26 x 1.6 |
5.66 |
7 |
22.23 |
50.8 |
2.9 |
6.8 (66.7) |
19 |
71 |
|
X247 |
12.7 x 1.83 |
10.87 |
7 |
22.23 |
44.45 |
2.7 |
8.2 (80) |
25 |
78 |
|
X327 |
9.6 x 1.83 |
7.77 |
8 |
22.23 |
57.15 |
3.1 |
8.2 (80) |
25 |
74 |
|
X328 |
9.6 x 2.08 |
7.52 |
8 |
25.4 |
82.55 |
3.75 |
10 (98) |
25 |
72 |
| Width Tolerance(max. width 4267mm);0 to 150 belt width: +/-0.8 150 to 900 belt width: +/-1.9 900 to 1500 belt width: +/-2.4 over 1500 belt width: +/-3.2 |
|||||||||
All dimensions are in millimetres (mm)
Component and Support Requirements for Flat-Flex® XT® Belts
|
COMPONENT QUANTITY CHART (SPROCKETS / BLANKS / SUPPORT STRIPS) |
||||
|
Number of XT spaces across belt |
Drive shaft |
Idler shaft |
Belt supports |
|
|
Number of Sprockets |
Number of |
Wear Strips |
||
|
Sprockets |
Blanks |
|||
|
3 |
3 |
2 |
1 |
2 |
|
4 |
4 |
2 |
2 |
3 |
|
5 |
5 |
2 |
3 |
4 |
|
6 |
6 |
2 |
4 |
5 |
|
7 |
7 |
2 |
5 |
6 |
|
8 |
8 |
2 |
6 |
7 |
|
9 |
9 |
2 |
7 |
8 |
|
10 |
10 |
2 |
8 |
9 |
|
11 |
11 |
2 |
9 |
10 |
|
12 |
12 |
2 |
10 |
11 |
|
13 |
13 |
2 |
11 |
12 |
|
14 |
14 |
2 |
12 |
13 |
|
15 |
15 |
2 |
13 |
14 |
|
16 |
16 |
2 |
14 |
15 |
|
17 |
17 |
2 |
15 |
16 |
|
18 |
18 |
2 |
16 |
17 |
|
19 |
19 |
2 |
17 |
18 |
|
20 |
20 |
2 |
18 |
19 |
|
21 |
21 |
2 |
19 |
20 |
|
22 |
22 |
2 |
20 |
21 |
|
23 |
23 |
2 |
21 |
22 |
|
24 |
24 |
2 |
22 |
23 |
|
25 |
25 |
2 |
23 |
24 |
|
26 |
26 |
2 |
24 |
25 |
|
27 |
27 |
2 |
25 |
26 |
Additional sprockets may be required on idler shafts exceeding 1200mm
Product detail pictures:
Related Product Guide:
We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for High reputation Stainless Steel Mesh Conveyor Belt - Wire Mesh Conveyor Belt Flat-Flex Type – JIKE, The product will supply to all over the world, such as: Borussia Dortmund, Borussia Dortmund, Germany, We look forward to hearing from you, whether you are a returning customer or a new one. We hope you will find what you are looking for here, if not, please contact us immediately. We pride ourselves on top notch customer service and response. Thank you for your business and support!
By Elma from Angola - 2017.09.30 16:36
The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
By Jonathan from Nicaragua - 2017.02.18 15:54
