New Arrival China Wire Belts - Wire Mesh Conveyor Belt Flat-Flex Type – JIKE Detail:
Flat-Flex® XT® conveyor belt is available in the following belt meshes:
- 7.26 X 1.60 mm
- 12.7 x 1.83 mm
- 9.60 x 1.83 mm
- 9.60 x 2.08 mm
Edge Loop Types Available:
C-Cure-Edge®
Single Loop Edge (SLE)
Flat-Flex® XT® Quick Reference Chart
|
XT Code Reference |
Pitch and Wire Diameter |
Nominal opening between wires |
Edge Loop Size |
XT Space Width |
Minimum Large Space Width |
Average Belt Weight (Kgs/m²) |
Maximum Tension per Joint – Kgf (N) |
Minimum Transfer Outside Diameter (grooved) |
Typical Open Area (%) |
|
X426 |
7.26 x 1.6 |
5.66 |
7 |
22.23 |
50.8 |
2.9 |
6.8 (66.7) |
19 |
71 |
|
X247 |
12.7 x 1.83 |
10.87 |
7 |
22.23 |
44.45 |
2.7 |
8.2 (80) |
25 |
78 |
|
X327 |
9.6 x 1.83 |
7.77 |
8 |
22.23 |
57.15 |
3.1 |
8.2 (80) |
25 |
74 |
|
X328 |
9.6 x 2.08 |
7.52 |
8 |
25.4 |
82.55 |
3.75 |
10 (98) |
25 |
72 |
| Width Tolerance(max. width 4267mm);0 to 150 belt width: +/-0.8 150 to 900 belt width: +/-1.9 900 to 1500 belt width: +/-2.4 over 1500 belt width: +/-3.2 |
|||||||||
All dimensions are in millimetres (mm)
Component and Support Requirements for Flat-Flex® XT® Belts
|
COMPONENT QUANTITY CHART (SPROCKETS / BLANKS / SUPPORT STRIPS) |
||||
|
Number of XT spaces across belt |
Drive shaft |
Idler shaft |
Belt supports |
|
|
Number of Sprockets |
Number of |
Wear Strips |
||
|
Sprockets |
Blanks |
|||
|
3 |
3 |
2 |
1 |
2 |
|
4 |
4 |
2 |
2 |
3 |
|
5 |
5 |
2 |
3 |
4 |
|
6 |
6 |
2 |
4 |
5 |
|
7 |
7 |
2 |
5 |
6 |
|
8 |
8 |
2 |
6 |
7 |
|
9 |
9 |
2 |
7 |
8 |
|
10 |
10 |
2 |
8 |
9 |
|
11 |
11 |
2 |
9 |
10 |
|
12 |
12 |
2 |
10 |
11 |
|
13 |
13 |
2 |
11 |
12 |
|
14 |
14 |
2 |
12 |
13 |
|
15 |
15 |
2 |
13 |
14 |
|
16 |
16 |
2 |
14 |
15 |
|
17 |
17 |
2 |
15 |
16 |
|
18 |
18 |
2 |
16 |
17 |
|
19 |
19 |
2 |
17 |
18 |
|
20 |
20 |
2 |
18 |
19 |
|
21 |
21 |
2 |
19 |
20 |
|
22 |
22 |
2 |
20 |
21 |
|
23 |
23 |
2 |
21 |
22 |
|
24 |
24 |
2 |
22 |
23 |
|
25 |
25 |
2 |
23 |
24 |
|
26 |
26 |
2 |
24 |
25 |
|
27 |
27 |
2 |
25 |
26 |
Additional sprockets may be required on idler shafts exceeding 1200mm
Product detail pictures:
Related Product Guide:
We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for New Arrival China Wire Belts - Wire Mesh Conveyor Belt Flat-Flex Type – JIKE, The product will supply to all over the world, such as: Namibia, Qatar, Liberia, We attained ISO9001 which provides solid foundation for our further development. Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments. It is our great honor to meet your demands. We are sincerely expecting your attention.
By tobin from Roman - 2018.12.22 12:52
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Grace from Austria - 2018.10.01 14:14
