Wholesale Steel Wire Belt - Wire Mesh Conveyor Belt Flat-Flex Type – JIKE

Whatever your needs, Wire Belt Company’s Technical Sales Engineers will work with you to determine the best Flat-Flex®belt configuration to accommodate your product, process, application and maintenance requirements.

If you require a unique belt or conveyor to deliver the best conveyor performance, we will not hesitate to design and deliver a totally customised solution for your application.  Our aim is your complete satisfaction with the performance of our products.  We are confident we can provide the right belt, sprockets and other components you need.

Standard Belt Data
Flat-Flex® is available in a wide range of wire diameters & pitches. The following table gives a broad indication of availability:

Note:  Due to pitch to wire dia. combination ratios not all pitches are available in the corresponding wire diameters stated.

The below data is an extract from our full range of Flat-Flex® belting.

Wire Belt Company produces in excess of 100 pitch & wire diameter specifications.  If you do not locate your specification in the table above then please consult with Customer Services.

Available in widths ranging from 28mm to 4,500mm

*Check with our Technical Sales Engineers if the belt requires a smaller reverse bend diameter.

Materials available;
Flat-Flex® belts are available in a wide variety of materials; the standard is 1.4310 (302) stainless steel. Other materials available include: 1.4404 (316L) stainless steel, various carbon steels, and specialist materials suitable for high temperature applications.
Flat-Flex® can be supplied with a PTFE-coating for applications requiring a non-stick surface. High friction finishes are also available.

Edge loop types:

C-Cure-Edge™	Double Loop Edge (DLE)	Single Loop Edge (SLE)
Check the reference chart above for edge availability per mesh C-CureEdge™ Single Loop Edge technology eliminates the possibility of the belt edge catching and tangling. They are an available option for a selected range of Flat-Flex® belts.  See above for availability listing. Click here to view further details. Double Loop Edges (also referred to as “Gear Wheel Edge”) can also be supplied to suit existing enrober belts. Single Loop Edges are the most common belt edge finish and are a default standard for 1.27mm wire diameters and above.

Flat-Flex® Drive Components

Sprockets and Blanks

When choosing the most appropriate sprocket material for your application, it is important to look at the conditions under which the belt will operate. Conditions such as abrasion, corrosion, high/low temperature variations, surrounding temperature, type of process performed, etc. all have an impact on sprocket selection.